Authentic RedHat EX200 Exam Dumps PDF - 2024 Updated [Q41-Q63]

Share

Authentic RedHat EX200 Exam Dumps PDF - 2024 Updated

Get Prepared for Your EX200 Exam With Actual 136 Questions


RedHat EX200 exam is a certification exam offered by Red Hat, Inc. that validates the skills and knowledge of individuals in administering Red Hat Enterprise Linux (RHEL) systems. The RHCSA certification is an entry-level certification that is highly valued by employers and is an essential requirement for individuals seeking to pursue a career in Linux system administration. EX200 exam is hands-on and performance-based and is suitable for professionals and individuals interested in pursuing a career in Linux system administration.

 

NEW QUESTION # 41
Your System is configured in 192.168.0.0/24 Network and your nameserver is 192.168.0.254. Make successfully resolve to server1.example.com.

Answer:

Explanation:
nameserver is specified in question,
1. Vi /etc/resolv.conf
nameserver 192.168.0.254
2. host server1.example.com


NEW QUESTION # 42
We are working on /data initially the size is 2GB. The /dev/test0/lvtestvolume is mount on /dat a. Now you required more space on /data but you already added all disks belong to physical volume. You saw that you have unallocated space around 5 GB on your harddisk. Increase the size of lvtestvolume by 5GB.

Answer:

Explanation:
Create a partition having size 5 GB and change the syste id '8e'.
use partprobe command
pvcreate /dev/hda9 Suppose your partition number is hda9.
vgextend test0 /dev/hda9 vgextend command add the physical disk on volume group.
lvextend -L+5120M /dev/test0/lvtestvolume
verify using lvdisplay /dev/test0/lvtestvolume.


NEW QUESTION # 43
Create a volume group, and set 8M as a extends. Divided a volume group containing 50 extends on volume group lv (lvshare), make it as ext4 file system, and mounted automatically under /mnt/data. And the size of the floating range should set between 380M and 400M.

Answer:

Explanation:
see explanation below.
Explanation
# fdisk
# partprobe
# pvcreate /dev/vda6
# vgcreate -s 8M vg1 /dev/vda6 -s
# lvcreate -n lvshare -l 50 vg1 -l
# mkfs.ext4 /dev/vg1/lvshare
# mkdir -p /mnt/data
# vim /etc/fstab
/dev/vg1/lvshare /mnt/data ext4 defaults 0 0
# mount -a
# df -h


NEW QUESTION # 44
Change the logical volume capacity named vo from 190M to 300M. and the size of the floating range should set between 280 and 320. (This logical volume has been mounted in advance.)

Answer:

Explanation:
# vgdisplay
(Check the capacity of vg, if the capacity is not enough, need to create pv , vgextend , lvextend)
# lvdisplay (Check lv)
# lvextend -L +110M /dev/vg2/lv2
# resize2fs /dev/vg2/lv2
mount -a
(Verify)
------------------------------------------------------------------------------- (Decrease lvm)
# umount /media
# fsck -f /dev/vg2/lv2
# resize2fs -f /dev/vg2/lv2 100M
# lvreduce -L 100M /dev/vg2/lv2
# mount -a
# lvdisplay (Verify)
OR
# e2fsck -f /dev/vg1/lvm02
# resize2fs -f /dev/vg1/lvm02
# mount /dev/vg1/lvm01 /mnt
# lvreduce -L 1G -n /dev/vg1/lvm02
# lvdisplay (Verify)


NEW QUESTION # 45
Configure a task: plan to run echo hello command at 14:23 every day.

Answer:

Explanation:
# which echo
# crontab -e
23 14 * * * /bin/echo hello
# crontab -l (Verify)


NEW QUESTION # 46
Create a 2G swap partition which take effect automatically at boot-start, and it should not affect the original swap partition.

Answer:

Explanation:
# fdisk /dev/sda
p
(check Partition table)
n
(create new partition: press e to create extended partition, press p to create the main partition, and the extended partition is further divided into logical partitions) Enter
+2G t
8 I
82
W
partx -a /dev/sda
partprobe
mkswap /dev/sda8
Copy UUID
swapon -a
vim /etc/fstab
UUID=XXXXX swap swap defaults 0 0
(swapon -s)


NEW QUESTION # 47
CORRECT TEXT
Create a 512M partition, make it as ext4 file system, mounted automatically under /mnt/data and which take effect automatically at boot-start.

Answer:

Explanation:
# fdisk /dev/vda
n
+512M
w
# partprobe /dev/vda
# mkfs -t ext4 /dev/vda5
# mkdir -p /data
# vim /etc/fstab
/dev/vda5 /data ext4 defaults 0 0
# mount -a


NEW QUESTION # 48
SIMULATION
There are two different networks, 192.168.0.0/24 and 192.168.1.0/24. Your System is in 192.168.0.0/24 Network. One RHEL6 Installed System is going to use as a Router. All required configuration is already done on Linux Server. Where 192.168.0.254 and 192.168.1.254 IP Address are assigned on that Server.
How will make successfully ping to 192.168.1.0/24 Network's Host?

Answer:

Explanation:
See explanation below.
Explanation/Reference:
Explanation:
vi /etc/sysconfig/network GATEWAY=192.168.0.254
OR
vi /etc/sysconf/network-scripts/ifcfg-eth0 DEVICE=eth0
BOOTPROTO=static
ONBOOT=yes
IPADDR=192.168.0.?
NETMASK=255.255.255.0
GATEWAY=192.168.0.254
service network restart
Gateway defines the way to exit the packets. According to question System working as a router for two networks have IP Address 192.168.0.254 and 192.168.1.254.


NEW QUESTION # 49
Make on /archive directory that only the user owner and group owner member can fully access.

Answer:

Explanation:
chmod 770 /archive
Verify using : ls -ld /archive Preview should be like:
drwxrwx--- 2 root sysuser 4096 Mar 16 18:08 /archive
To change the permission on directory we use the chmod command. According to the question that only the owner user (root) and group member (sysuser) can fully access the directory so: chmod 770 /archive


NEW QUESTION # 50
Which of the following mechanisms are used for service discovery in a container environment? (Choose two
correct answers.)

  • A. The container platform sets environment variables containing service information within the containers.
  • B. The container platform offers a command like docker service discoverwhich should be run within a
    container.
  • C. The container platform lists localhost ports assigned to containers in each container's /etc/servicesfile.
  • D. The container platforms maintains DNS records which point to containers offering a specific service.
  • E. The container platform mounts the sockets for all available services into the container's file systems.

Answer: A,D


NEW QUESTION # 51
SIMULATION
A YUM source has been provided in the
http://instructor.example.com/pub/rhel6/dvd
Configure your system and can be used normally.

Answer:

Explanation:
See explanation below.
Explanation/Reference:
Explanation:
/etc/yum.repos.d/base.repo
[base]
name=base
baseurl=http://instructor.example.com/pub/rhel6/dvd
gpgcheck=0
yum list


NEW QUESTION # 52
The firewall must be open.

Answer:

Explanation:
see explanation below.
Explanation
/etc/init.d/iptables start
iptables -F
iptables -X
iptables -Z
/etc/init.d/iptables save
chkconfig iptables on


NEW QUESTION # 53
One Logical Volume is created named as myvol under vo volume group and is mounted. The Initial Size of that Logical Volume is 400MB. Make successfully that the size of Logical Volume 200MB without losing any dat a. The size of logical volume 200MB to 210MB will be acceptable.

Answer:

Explanation:
First check the size of Logical Volume: lvdisplay /dev/vo/myvol
Make sure that the filesystem is in a consistent state before reducing:
# fsck -f /dev/vo/myvol
Now reduce the filesystem by 200MB.
# resize2fs /dev/vo/myvol 200M
It is now possible to reduce the logical volume. #lvreduce /dev/vo/myvol -L 200M Verify the Size of Logical Volume: lvdisplay /dev/vo/myvol Verify that the size comes in online or not: df -h


NEW QUESTION # 54
CORRECT TEXT
Configure a task: plan to run echo "file" command at 14:23 every day.

Answer:

Explanation:
(a) Created as administrator
# crontab -u natasha -e
23 14 * * * /bin/echo "file"
(b)Created as natasha
# su - natasha
$ crontab -e
23 14 * * * /bin/echo "file"


NEW QUESTION # 55
One Logical Volume named lv1 is created under vg0. The Initial Size of that Logical Volume is 100MB. Now you required the size 500MB. Make successfully the size of that Logical Volume 500M without losing any data. As well as size should be increased online.

Answer:

Explanation:
see explanation below.
Explanation
The LVM system organizes hard disks into Logical Volume (LV) groups. Essentially, physical hard disk partitions (or possibly RAID arrays) are set up in a bunch of equal sized chunks known as Physical Extents (PE). As there are several other concepts associated with the LVM system, let's start with some basic definitions:
Physical Volume (PV) is the standard partition that you add to the LVM mix. Normally, a physical volume is a standard primary or logical partition. It can also be a RAID array.
Physical Extent (PE) is a chunk of disk space. Every PV is divided into a number of equal sized PEs. Every PE in a LV group is the same size. Different LV groups can have different sized PEs.
Logical Extent (LE) is also a chunk of disk space. Every LE is mapped to a specific PE.
Logical Volume (LV) is composed of a group of LEs. You can mount a file system such as /home and /var on an LV.
Volume Group (VG) is composed of a group of LVs. It is the organizational group for LVM. Most of the commands that you'll use apply to a specific VG.
* Verify the size of Logical Volume: lvdisplay /dev/vg0/lv1
* Verify the Size on mounted directory: df -h or df -h mounted directory name
* Use: lvextend -L+400M /dev/vg0/lv1
* ext2online -d /dev/vg0/lv1 to bring extended size online.
* Again Verify using lvdisplay and df -h command.


NEW QUESTION # 56
Create a logical volume
Create a new logical volume as required:
Name the logical volume as database, belongs to datastore of the volume group, size is 50 PE.
Expansion size of each volume in volume group datastore is 16MB.
Use ext3 to format this new logical volume, this logical volume should automatically mount to /mnt/database

Answer:

Explanation:
see explanation below.
Explanation
fdisk -cu /dev/vda// Create a 1G partition, modified when needed
partx -a /dev/vda
pvcreate /dev/vdax
vgcreate datastore /dev/vdax -s 16M
lvcreate- l 50 -n database datastore
mkfs.ext3 /dev/datastore/database
mkdir /mnt/database
mount /dev/datastore/database /mnt/database/ df -Th
vi /etc/fstab
/dev/datastore /database /mnt/database/ ext3 defaults 0 0 mount -a
Restart and check all the questions requirements.


NEW QUESTION # 57
Configure /var/tmp/fstab Permission.
Copy the file /etc/fstab to /var/tmp/fstab. Configure var/tmp/fstab permissions as the following:
Owner of the file /var/tmp/fstab is Root, belongs to group root
File /var/tmp/fstab cannot be executed by any user
User natasha can read and write /var/tmp/fstab
User harry cannot read and write /var/tmp/fstab
All other users (present and future) can read var/tmp/fstab.

Answer:

Explanation:
see explanation below.
Explanation
cp /etc/fstab /var/tmp/
* /var/tmp/fstab view the owner setfacl -m u:natasha:rw- /var/tmp/fstab setfacl -m u:haryy:---
/var/tmp/fstab
Use getfacl /var/tmp/fstab to view permissions


NEW QUESTION # 58
SELinux must run in force mode.

Answer:

Explanation:
/etc/sysconfig/selinux
SELINUX=enforcing


NEW QUESTION # 59
Part 1 (on Node1 Server)
Task 15 [Running Containers]
Create a container named logserver with the image rhel8/rsyslog found from the registry registry.domain15.example.com:5000 The container should run as the root less user shangril a. use redhat as password [sudo user] Configure the container with systemd services as the shangrila user using the service name, "container-logserver" so that it can be persistent across reboot.
Use admin as the username and admin123 as the credentials for the image registry.

Answer:

Explanation:
* [root@workstation ~]# ssh shangrila@node1
[shangrila@node1 ~]$ podman login registry.domain15.example.com:5000
Username: admin
Password:
Login Succeeded!
[shangrila@node1 ~]$ podman pull registry.domain15.example.com:5000/rhel8/rsyslog
[shangrila@node1 ~]$ podman run -d --name logserver registry.domain15.example.com:5000/rhel8/rsyslog
021b26669f39cc42b8e94eab886ba8293d6247bf68e4b0d76db2874aef284d6d
[shangrila@node1 ~]$ mkdir -p ~/.config/systemd/user
[shangrila@node1 ~]$ cd ~/.config/systemd/user
* [shangrila@node1 user]$ podman generate systemd --name logserver --files --new
/home/shangrila/.config/systemd/user/container-logserver.service
[shangrila@node1 ~]$ systemctl --user daemon-reload
[shangrila@node1 user]$ systemctl --user enable --now container-logserver.service
[shangrila@node1 ~]$ podman ps
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
7d9f7a8a4d63 registry.domain15.example.com:5000/rhel8/rsyslog:latest /bin/rsyslog.sh 2 seconds ago logserver
[shangrila@node1 ~]$ sudo reboot
[shangrila@node1 ~]$ cd .config/systemd/user
[shangrila@node1 user]$ systemctl --user status


NEW QUESTION # 60
Create a logical volume
Create a new logical volume as required:
Name the logical volume as database, belongs to datastore of the volume group, size is 50 PE.
Expansion size of each volume in volume group datastore is 16MB.
Use ext3 to format this new logical volume, this logical volume should automatically mount to /mnt/database

Answer:

Explanation:
fdisk -cu /dev/vda// Create a 1G partition, modified when needed
partx -a /dev/vda
pvcreate /dev/vdax
vgcreate datastore /dev/vdax -s 16M
lvcreate- l 50 -n database datastore
mkfs.ext3 /dev/datastore/database
mkdir /mnt/database
mount /dev/datastore/database /mnt/database/ df -Th
vi /etc/fstab
/dev/datastore /database /mnt/database/ ext3 defaults 0 0 mount -a
Restart and check all the questions requirements.


NEW QUESTION # 61
Find all lines in the file /usr/share/dict/words that contain the string seismic. Put a copy of all these lines in their original order in the file /root/wordlist. /root/wordlist should contain no empty lines and all lines must be exact copies of the original lines in /usr/share/dict/words.

Answer:

Explanation:
see explanation below.
Explanation
grep seismic /usr/share/dict/words> /root/wordlist


NEW QUESTION # 62
Part 1 (on Node1 Server)
Task 14 [Managing SELinux Security]
You will configure a web server running on your system serving content using a non-standard port (82)

Answer:

Explanation:
* [root@node1 ~]# curl http://node1.domain15.example.com
curl: (7) Failed to connect to node1.domain15.example.com port 80: Connection refused
[root@node1 ~]# yum install httpd
[root@node1 ~]# systemctl enable --now httpd
Created symlink /etc/systemd/system/multi-user.target.wants/httpd.service → /usr/lib/systemd/system/httpd.service.
[root@node1 ~]# systemctl start httpd
[root@node1 ~]# systemctl status httpd
Status: "Running, listening on: port 80"
* [root@node1 ~]# wget http://node1.domain15.example.com
2021-03-23 13:27:28 ERROR 403: Forbidden.
[root@node1 ~]# semanage port -l | grep http
http_port_t tcp 80, 81, 443, 488, 8008, 8009, 8443, 9000
[root@node1 ~]# semanage port -a -t http_port_t -p tcp 82
[root@node1 ~]# semanage port -l | grep http
http_port_t tcp 82, 80, 81, 443, 488, 8008, 8009, 8443, 9000
[root@node1 ~]# firewall-cmd --zone=public --list-all
[root@node1 ~]# firewall-cmd --permanent --zone=public --add-port=82/tcp
[root@node1 ~]# firewall-cmd --reload
[root@node1 ~]# curl http://node1.domain15.example.com
OK
* root@node1 ~]# wget http://node1.domain15.example.com:82
Connection refused.
[root@node1 ~]# vim /etc/httpd/conf/httpd.conf
Listen 82
[root@node1 ~]# systemctl restart httpd
[root@node1 ~]# wget http://node1.domain15.example.com:82
2021-03-23 13:31:41 ERROR 403: Forbidden.
[root@node1 ~]# curl http://node1.domain15.example.com:82
OK


NEW QUESTION # 63
......

Accurate & Verified New EX200 Answers As Experienced in the Actual Test!: https://guidetorrent.passcollection.com/EX200-valid-vce-dumps.html