[Dec-2025] Verified F5 201 Bundle Real Exam Dumps PDF [Q148-Q168]

[Dec-2025] Verified F5 201 Bundle Real Exam Dumps PDF

201 Dumps PDF New [2025] Ultimate Study Guide

By passing the F5 201 exam, IT professionals demonstrate their proficiency in managing and securing F5 BIG-IP systems, which are widely used in enterprise and service provider networks to optimize application delivery, improve network performance, and enhance security. BIG-IP Administrator Exam certification is recognized as a valuable credential in the IT industry and can help IT professionals advance in their careers and open up new opportunities for employment.

F5 201: BIG-IP Administrator exam is a comprehensive certification program that includes hands-on training and experience. Candidates can prepare for the exam by taking F5 training courses, reading study materials, and practicing with the F5 BIG-IP platform. BIG-IP Administrator Exam certification program is designed to ensure that certified professionals have the skills and knowledge required to manage and maintain complex F5 networks.

NEW QUESTION # 148
Refer to the exhibit.

A BIG-IP Administrator creates a new Virtual Server. The end user is unable to access the page. During troubleshooting, the administrator learns that the connection between the BIG-IP system and server is NOT set up correctly.
What should the administrator do to solve this issue?

A. Set Address Translation to SNAT and have self-IP configured in the same subnet of servers
B. Disable Address Translation
C. Set Address Translation to Auto Map, configure a SNAT pool, and have pool members in the same subnet of the servers
D. Set Address Translation to SNAT and configure a specific translation address

Answer: D

Explanation:
Explanation
The status of the pool can be seen that the members are all up, indicating that the network from F5 to the server is no problem, so there is no need to configure selfip on the same subnet. The monitor is normal but the access is not normal, you have to consider the problem of snat, you can configure automap or configure snat and specify snat ip.

NEW QUESTION # 149
A site has assigned the ICMP monitor to all nodes and a custom monitor, based on the HTTP template, to a pool of web servers. The HTTP based monitor is working in all cases. The ICMP monitor is failing for 2 of the pool member 5 nodes.
All other settings are default. What is the status of the monitor is working in all cases?

A. All pool members are up since the HTTPbased monitor is successful.
B. The pool members whose nodes are failing the ICMPbased monitor will be marked disabled.
C. All pool members are down since the ICMPbased monitor is failing in some cases.
D. The pool members whose nodes are failing the ICMPbased monitor will be marked unavailable.

Answer: D

NEW QUESTION # 150
When upgrading a BIGElIP redundant pair, what happens when one system has been updated but the other has not.

A. The first system to be updated will assume the Active role.
B. This is not possible since both systems are updated simultaneously.
C. The older system will issue SNMP traps indicating a communication error with the partner.
D. Synching should not be performed.

Answer: D

NEW QUESTION # 151
A BIG-IP Administrator creates an HTTP Virtual Server using an iApp template. After the Virtual Server is created, the user requests to change the destination IP addresses. The BIG-IP Administrator tries to change the destination IP address from 10.1.1.1 to 10.2.1.1 in Virtual Server settings, but receives the following error:
The application service must be updated using an application management interface What is causing this error?

A. The IP addresses are already in use.
B. The Application Services have Strict Updates enabled.
C. The Application Service was NOT deleted before making the IP address change.
D. The IP addresses used are NOT from the same subnet as the Self IP.

Answer: B

Explanation:
Strict Updates : Indicates whether the application service is tied to the template, so when the template is updated, the application service changes to reflect the updates.

NEW QUESTION # 152
Which is an advantage of terminating SSL communication at the BIGIP rather than the ultimate web server?

A. Terminating SSL at the BIG-IP eliminates the need to use SSL acceleration hardware anywhere in the network.
B. Terminating SSL at IP the eliminates BIG all unencrypted traffic from the internal network.
C. Terminating SSL at the BIG-IP eliminates the need to purchase SSL certificates from a certificate authority.
D. Terminating SSL at the BIG-IP can eliminate SSL processing at the web servers.

Answer: D

NEW QUESTION # 153
Refer to the exhibit.

Which two pool members are eligible to receive new connections? (Choose two)

A. 10.21.0.101.80
B. 10.21.0.102.80
C. 10.21.0.105.80
D. 10.21.0.104.80
E. 10.21.0.103.80

Answer: A,D

NEW QUESTION # 154
Refer to the exhibit.

Which Pool Members are receiving traffic?

A. serv1, serv3
B. serv1
C. Serv1, serv2,serv3, serv4
D. serv1, serv3, serv4

Answer: D

NEW QUESTION # 155
A site has six members in a pool. All of the servers have been designed, built, and configured with the same applications. It is known that each client's interactions vary significantly and can affect the performance of the servers. If traffic should be sent to all members on a regular basis, which loadbalancing mode is most effective if the goal is to maintain a
relatively even load across all servers.

A. Round Robin
B. Ratio
C. Observed
D. Priority

Answer: C

NEW QUESTION # 156
How is MAC masquerading configured.

A. Specify the desired MAC address for each VLAN for which you want this feature enabled.
B. Specify the desired MAC address for each floating selfElIP address for which you want this feature enabled.
C. Specify the desired MAC address for each selfElIP address for which you want this feature enabled.
D. Specify the desired MAC address for each VLAN on the active system and synchronize the systems.

Answer: A

NEW QUESTION # 157
Which parameters are set to the same value when a pair of BIG-IP devices are synchronized?

A. profile definitions
B. VLAN failsafe settings
C. host names
D. MAC masquerade addresses
E. system clocks

Answer: A

NEW QUESTION # 158
A 8IG-IP Administrator is making adjustments to an iRule and needs to identify which of the 235 virtual server configured on the BIG-IP device will be affected.
How should the administrator obtain this information in an effective way?

A. LOCAL Traffic > Network Map
B. Local Traffic > Virtual Server
C. Local traffio Pools
D. Local traffic > Rules

Answer: A

NEW QUESTION # 159
Which IP address will the client address be changed to when SNAT automap is specified within a Virtual Server configuration.

A. It will alternate between the floating and noElfnloating self IP address on the VLAN where the packet arrives on the system so that port exhaustion is avoided.
B. The floating self IP address on the VLAN where the packet arrives on the system.
C. The floating self IP address on the VLAN where the packet leaves the system.
D. It will alternate between the floating and noEl nfloating self IP address on the VLAN where the packet leaves the system so that port exhaustion is avoided.

Answer: C

NEW QUESTION # 160
A BIG-IP has two load balancing virtual servers at 150.150.10.10:80 and 150.150.10.10:443. The port 80 virtual server has SNAT automap configured. There is also a SNAT configured at 150.150.10.11 set for a source address range of 200.200.1.0 / 255.255.255.0. All other settings are at their default states. If a client with the IP address 200.200.1.1 sends a request to https://150.150.10.10, What is the source IP address when the associated packet is sent to the pool member?

A. Floating self IP address on VLAN where the packet leaves the system
B. 200.200.1.1
C. 150.150.10.11
D. Floating self IP address on VLAN where the packet arrives on the system

Answer: C

NEW QUESTION # 161
Refer to the exhibit

A connection is being established to IP 1.1.1.1 on port 8080.
Which virtual server will handle the connection?

A. fwd_8080_vs
B. fwdvs
C. host_ 8080_VS
D. host_vs

Answer: D

NEW QUESTION # 162
When using the setup utility to configure a redundant pair, you are asked to provide a "Failover Peer IP". Which address is this?

A. an address of the other system in its management network
B. an address on the current system used to initiate mirroring and network failover heartbeat messages
C. an address of the other system in a redundant pair configuration
D. an address on the current system used to listen for failover messages from the partner BIG-IP

Answer: C

NEW QUESTION # 163
Assume a virtual server has a ServerSSL profile. What SSL certificates are required on the BIG-IP?

A. The BIG-IP's SSL certificates must be created within the company hosting the BIG-IPs.
B. The BIG-IP's SSL certificates must be issued from a certificate authority.
C. The BIG-IP's SSL certificates must only exist.
D. No SSL certificates are required on the BIG-IP.

Answer: D

NEW QUESTION # 164
A BIG-IP device sends out the following SNMP trap:
big-ipo.f5.com - bigipExternalLinkChange Link: 1.0 is DOWN
Where in the BIG-IP Configuration utility should the BIG-IP Administrator verify the current status of Link
1.0?

A. Network > Trunks > Trunk List
B. Statistics > Performance > System
C. System > Platform
D. Network > Interfaces > Interface List
1.0 is a physical interface, you can see the interface status from the physical interface in the network.

Answer: D

NEW QUESTION # 165
A BIG-IP Administrator receives an RMA replacement for a failed F5 device. The BIG-IP Administrator tries to restore a UCS taken from the previous device, but the restore fails. The following error appears inthe/var/log/itm.
mcpd [****J: ******>;0; License is not operational (expired or digital signature does not match contents.) What should the BIG-IP Administrator do to avoid this error?

A. Use the appropriate tmsh command with the no-license option
B. Revoke the license prior to restoring
C. Remove the license information from the UCS archive
D. Reactivate the license on the new device using the manual activation method

Answer: A

NEW QUESTION # 166

A BIG-IP Administrator notices that one of the servers that runs an application is NOT receiving any traffic.
The BIG-IP Administrator examines the configuration status of the application and observes the displayed monitor configuration and affected Pool Member status. What is the possible cause of this issue?