[Mar 12, 2026] Pass VMware 2V0-13.25 Exam Info and Free Practice Test
2V0-13.25 Exam Dumps PDF Updated Dump from PassCollection Guaranteed Success
VMware 2V0-13.25 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
NEW QUESTION # 41
What VMware cloud solutions benefit from Broadcom's hardware optimization?
- A. VMware vCloud Director
- B. VMware Horizon Cloud
- C. VMware vSphere
- D. VMware Cloud on AWS
Answer: A,B,C,D
Explanation:
VMware Cloud on AWS, vSphere, vCloud Director, and Horizon Cloud all benefit from Broadcom's hardware optimization.
NEW QUESTION # 42
What are the key steps in troubleshooting VMware storage performance with Broadcom RAID controllers?
- A. Ensure the RAID controller firmware is up to date
- B. Check disk health and status
- C. Reset RAID controller settings
- D. Verify RAID controller configuration
Answer: A,B,D
Explanation:
Ensuring proper configuration, updating firmware, and checking disk health are essential to resolving RAID performance issues.
NEW QUESTION # 43
An architect is designing a VMware Cloud Foundation (VCF)-based private cloud solution for a customer.
The customer has stated the following requirement:
All components within the solution must be resilient to N+1.
During discovery, the following information has also been provided:
Over the next 3 years, due to various applications being retired, no overall growth in resource consumption is expected.
Following a review of a demand-based capacity report from Aria Operations, the architect has calculated that all of the existing workloads should fit into a 4-node cluster. Once all workloads are migrated, the resources of the cluster will be 90% utilized.
Given the information provided, a combination of which three design decisions satisfy the requirement? (Choose three.)
- A. The solution will deploy a workload cluster consisting of four VMware vSphere hosts.
- B. The solution will configure vSphere Dynamic Resource Scheduling (DRS) for the workload cluster.
- C. The solution will configure vSphere High Availability (HA) for the workload cluster.
- D. The solution will set the Host failures cluster tolerates for the workload cluster to 1.
- E. The solution will deploy a workload cluster consisting of five VMware vSphere hosts.
- F. The solution will set the DRS Automation level setting for the workload cluster to Partially Automated.
Answer: C,D,E
Explanation:
The requirement for N+1 resiliency means the solution must tolerate the failure of one component (in this case, one ESXi host) without disrupting workloads. In VMware Cloud Foundation (VCF), this is typically achieved through vSphere High Availability (HA) settings and sufficient host capacity. The scenario provides key constraints: a 4-node cluster can handle all workloads at 90% utilization, and no growth is expected.
Let's evaluate each option:
Option A: Set the DRS Automation level to Partially Automated
DRS (Dynamic Resource Scheduling) balances workloads across hosts, but the automation level (Partially Automated vs. Fully Automated) doesn't directly impact N+1 resiliency. Partially Automated requires manual approval for migrations, which doesn't enhance or detract from HA-based resiliency. While DRS is useful, this specific setting isn't critical to the N+1 requirement, per the VMware Cloud Foundation 5.2 Architectural Guide.
Option B: Deploy a workload cluster consisting of five VMware vSphere hosts A 5-node cluster provides N+1 resiliency when paired with HA configured to tolerate one host failure. If one host fails, the remaining four can handle the workload, assuming capacity planning accounts for this. The Aria Operations report indicates a 4-node cluster is sufficient at 90% utilization, but adding a fifth host ensures capacity remains after a failure (reducing utilization to ~72% across four hosts: 90% / 1.25). This aligns with VCF's standard architecture recommendations for resiliency (VMware Cloud Foundation 5.2 Architectural Guide).
Option C: Set the Host failures cluster tolerates for the workload cluster to 1 This HA setting ensures the cluster reserves capacity (e.g., CPU and memory) to failover VMs from one failed host. In VCF, setting "Host failures cluster tolerates" to 1 is a direct implementation of N+1 resiliency, making it a required design decision (vSphere Availability Guide and VCF 5.2 Administration Guide).
Option D: Deploy a workload cluster consisting of four VMware vSphere hosts A 4-node cluster meets capacity needs at 90% utilization but lacks N+1 resiliency without additional capacity. If one host fails, the remaining three would be overcommitted (120% utilization: 90% / 0.75), risking performance or availability. Thus, this doesn't satisfy the requirement alone.
Option E: Configure vSphere High Availability (HA) for the workload cluster HA is foundational to N+1 resiliency in vSphere and VCF, enabling VM restarts on surviving hosts after a failure. Without HA, N+1 cannot be achieved, making this a mandatory choice (VMware Cloud Foundation 5.2 Administration Guide).
Option F: Configure vSphere Dynamic Resource Scheduling (DRS) for the workload cluster DRS enhances performance by balancing workloads but isn't strictly required for N+1 resiliency, which focuses on availability, not optimization. It's a best practice in VCF but not one of the three critical decisions for this requirement.
Conclusion:
B: A 5-node cluster provides the extra host for N+1.
C: HA set to tolerate 1 host failure implements N+1 policy.
E: HA configuration enables failover, a core N+1 component.
Options B, C, and E together ensure the cluster can lose one host without service disruption, meeting the customer's requirement.
Reference: VMware Cloud Foundation 5.2 Architectural Guide (docs.vmware.com): Section on Workload Domain Design and HA/DRS Configuration.
vSphere Availability Guide (docs.vmware.com): Chapter on Configuring High Availability.
VMware Cloud Foundation 5.2 Administration Guide (docs.vmware.com): HA and Cluster Sizing Guidelines.
NEW QUESTION # 44
In designing a VMware Cloud Foundation environment with Broadcom solutions, which components are necessary for efficient data transfer?
- A. vSphere Distributed Switch (VDS)
- B. vSAN
- C. Broadcom RAID Controller
- D. Broadcom 25GbE Ethernet Adapter
Answer: A,D
Explanation:
Broadcom 25GbE Ethernet Adapters and vSphere Distributed Switch (VDS) enable efficient data transfer in VMware Cloud Foundation.
NEW QUESTION # 45
What is the primary purpose of vSphere Tags?
- A. Manage storage policies
- B. Allocate resources
- C. Organize and categorize resources
- D. Monitor cluster performance
Answer: C
Explanation:
Tags allow administrators to organize and categorize vSphere resources.
NEW QUESTION # 46
What are the common issues affecting VMware storage performance with Broadcom hardware?
- A. Incorrect RAID configuration
- B. Insufficient storage capacity
- C. Disk failure or degradation
- D. Driver incompatibility
Answer: A,C,D
Explanation:
Disk failure, RAID misconfiguration, driver issues, and capacity limitations are common performance issues.
NEW QUESTION # 47
Requirement: The solution must include high security hardening levels to meet military compliance standards.
Which two physical design decisions will meet this security requirement in the workload domain? (Choose two.)
- A. The vSAN storage policy will be configured as Secondary Failures to Tolerate = 1.
- B. NTP will be configured to the internal NTP servers of 192.168.12.1 and 192.168.24.1.
- C. The advanced setting UserVars.SuppressShellWarning will be configured to 0 across all ESXi hosts.
- D. VCF Operations will be configured to renew the SSL certificate for vCenter Server per security policies.
- E. The certificate of the VI workload domain vCenter Server will be issued by RootCA.Military.Domain.Com.
Answer: C,E
Explanation:
* D: Setting UserVars.SuppressShellWarning = 0 ensureswarnings are shown when shell access is used
, improving auditability and compliance.
* E: Usingcertificates signed by a trusted military Root CAaligns with security compliance standards for certificate trust and chain of custody.
Options A and C are operational best practices, but notmilitary hardening. B is about operations automation, not compliance-level hardening.
Reference:VMware Cloud Foundation 9.0 Security Hardening Guide.
NEW QUESTION # 48
Which Broadcom solutions are ideal for enhancing data throughput and performance in VMware Cloud Foundation?
- A. Broadcom Ethernet adapters
- B. Broadcom NVMe SSDs
- C. Broadcom Fibre Channel HBAs
- D. Broadcom RAID controllers
Answer: A,B,C
Explanation:
Broadcom's NVMe SSDs, Fibre Channel HBAs, and Ethernet adapters are critical for enhancing data throughput and performance in VMware Cloud Foundation.
NEW QUESTION # 49
Which VMware tools help ensure security and compliance in VMware Cloud Foundation?
- A. VMware NSX
- B. VMware vSAN
- C. VMware vRealize Suite
- D. VMware vSphere
Answer: A,C
Explanation:
VMware NSX and vRealize Suite provide essential security and compliance features within VMware Cloud Foundation environments.
NEW QUESTION # 50
In a VMware environment using Broadcom hardware, which components contribute most to improving network performance and scalability?
- A. Broadcom Fibre Channel HBA
- B. vSphere DRS
- C. Broadcom RAID Controller
- D. Broadcom 25GbE Ethernet Adapter
Answer: B,D
Explanation:
Broadcom 25GbE Ethernet Adapters and vSphere DRS are key for network performance and scalability in VMware environments.
NEW QUESTION # 51
Which VMware tools contribute to automating resource management in VMware Cloud Foundation?
- A. VMware vRealize Automation
- B. VMware vRealize Orchestrator
- C. VMware vRealize Operations
- D. VMware vSphere
Answer: A,B,C
Explanation:
VMware Cloud Foundation benefits from automation through tools like vRealize Automation, Orchestrator, and Operations.
NEW QUESTION # 52
Which actions can be taken to optimize the performance of VMware VMs using Broadcom NVMe SSDs?
- A. Enable SSD caching
- B. Use a single large SSD
- C. Use multiple NVMe SSDs in RAID 0
- D. Verify SSD firmware and driver updates
Answer: A,C,D
Explanation:
Enabling SSD caching, using RAID 0, and ensuring firmware updates will optimize VM performance.
NEW QUESTION # 53
Constraint: Existing stretched cluster model must be used.
Requirement: Minimize management infrastructure downtime.
Which Supervisor deployment model supports the design?
- A. Single Management Zone Supervisor deployment with Simple Availability control plane
- B. Single Management Zone Supervisor deployment with HA control plane
- C. Three Management Zone deployment with Simple Availability control plane
- D. Three Management Zone Supervisor deployment with HA control plane
Answer: B
Explanation:
* Since the constraint isexisting stretched cluster model, the design assumes a single cluster across two sites.
* To meet theminimize downtime requirement, theSingle Management Zone Supervisor with HA control planeensures control plane resiliency within that stretched cluster.
Options with "Simple Availability" do not meet the high availability requirement. Options with three zones are not applicable because the constraint specifies a stretched cluster model.
Reference:VMware Cloud Foundation with Tanzu - Supervisor Deployment Models.
NEW QUESTION # 54
During the requirements capture workshop, the customer expressed a plan to use Aria Operations Continuous Availability to satisfy the availability requirements for a monitoring solution. They will validate the feature by deploying a Proof of Concept (POC) into an existing low-capacity lab environment.
What is the minimum Aria Operations analytics node size the architect can propose for the POC design?
- A. Large
- B. Medium
- C. Extra Small
- D. Small
Answer: D
Explanation:
The customer plans to use Aria Operations Continuous Availability (CA), a feature in VMware Aria Operations (formerly vRealize Operations) introduced in version 8.x and supported in VCF 5.2, to ensure monitoring solution availability. Continuous Availability separates analytics nodes into fault domains (e.g., primary and secondary sites) for high availability, validated here via a POC in a low-capacity lab. The architect must propose the minimum node size that supports CA in this context. Let's analyze:
Aria Operations Node Sizes:
Per the VMware Aria Operations Sizing Guidelines, analytics nodes come in four sizes:
Extra Small: 2 vCPUs, 8 GB RAM (limited to lightweight deployments, no CA support).
Small: 4 vCPUs, 16 GB RAM (entry-level production size).
Medium: 8 vCPUs, 32 GB RAM.
Large: 16 vCPUs, 64 GB RAM.
Continuous Availability Requirements:
CA requires at least two analytics nodes (one per fault domain) configured in a split-site topology, with a witness node for quorum. The VMware Aria Operations Administration Guide specifies that CA is supported starting with the Small node size due to resource demands for data replication and failover (e.g., memory for metrics, CPU for processing). Extra Small nodes are restricted to basic standalone or lightweight deployments and lack the capacity for CA's HA features.
POC in Low-Capacity Lab:
A low-capacity lab implies limited resources, but the POC must still validate CA functionality. The VCF 5.2 Architectural Guide notes that Small nodes are the minimum for production-like features like CA, balancing resource use with capability. For a POC, two Small nodes (plus a witness) fit a low-capacity environment while meeting CA requirements, unlike Extra Small, which isn't supported.
Option A: Small
Small nodes (4 vCPUs, 16 GB RAM) are the minimum size for CA, supporting the POC's goal of validating availability in a lab. This aligns with VMware's sizing recommendations.
Option B: Medium
Medium nodes (8 vCPUs, 32 GB RAM) exceed the minimum, suitable for larger deployments but unnecessary for a low-capacity POC.
Option C: Extra Small
Extra Small nodes (2 vCPUs, 8 GB RAM) don't support CA, as confirmed by the Aria Operations Sizing Guidelines, due to insufficient resources for replication and failover, making them invalid here.
Option D: Large
Large nodes (16 vCPUs, 64 GB RAM) are overkill for a low-capacity POC, designed for high-scale environments.
Conclusion:
The minimum Aria Operations analytics node size for the POC is Small (A), enabling Continuous Availability in a low-capacity lab while meeting the customer's validation goal.
Reference: VMware Cloud Foundation 5.2 Architectural Guide (docs.vmware.com): Aria Operations Integration and HA Features.
VMware Aria Operations Administration Guide (docs.vmware.com): Continuous Availability Configuration and Requirements.
VMware Aria Operations Sizing Guidelines (docs.vmware.com): Node Size Specifications.
NEW QUESTION # 55
Which of the following are benefits of using VMware Tools in VMs? (Select all that apply.)
- A. Improved driver performance
- B. Time synchronization
- C. Better guest OS interaction
- D. Automated snapshots
Answer: A,B,C
Explanation:
VMware Tools provides performance improvements, better OS interaction, and time synchronization.
NEW QUESTION # 56
Which Broadcom solutions are required for implementing a high-performance storage solution in VMware?
- A. Broadcom NVMe SSD
- B. Broadcom RAID Controller
- C. vSAN
- D. Broadcom 25GbE Ethernet Adapter
Answer: A,B
Explanation:
Broadcom RAID Controllers and NVMe SSDs are required for high-performance storage solutions in VMware environments.
NEW QUESTION # 57
Which VMware Cloud Foundation tools help optimize cloud cost management?
- A. VMware vRealize Automation
- B. VMware vRealize Operations
- C. VMware vSAN
- D. VMware vSphere
Answer: A,B
Explanation:
VMware vRealize Automation and vRealize Operations help optimize cloud cost management in VMware Cloud Foundation.
NEW QUESTION # 58
How do Broadcom's networking solutions support VMware Horizon virtual desktop environments?
- A. Efficient remote access
- B. Low-latency networking
- C. High throughput
- D. Virtual machine migration
Answer: A,B,C,D
Explanation:
Broadcom networking solutions support VMware Horizon by ensuring low-latency, high-throughput, efficient remote access, and smooth VM migration.
NEW QUESTION # 59
Which Broadcom components are essential for setting up a VMware environment with high availability?
- A. vSphere HA
- B. Broadcom RAID Controller
- C. vSAN
- D. Broadcom 25GbE Ethernet Adapter
Answer: A,B,C
Explanation:
vSphere HA, Broadcom RAID Controllers, and vSAN contribute to VMware high availability.
NEW QUESTION # 60
An architect is responsible for designing a VMware Cloud Foundation (VCF)-based private cloud. During the design requirements gathering workshop, the following information was captured:
* The solution must capture events from all infrastructure components of the VCF fleet.
* The solution must provide a single pane of glass management interface for troubleshooting, alerting, and monitoring using metrics, events, and flows.
* The solution must meet a 99.9% Service Level Agreement for Availability.
Which three design decisions should the architect make to meet the stated requirements? (Choose three.)
- A. Configure the integration for VCF Operations and VCF Operations for logs.
- B. Configure the integration for VCF Operations and VCF Automation.
- C. Deploy VCF Operations for logs in a Simple model.
- D. Deploy VCF Operations for logs in a High Availability model.
- E. Configure VCF Operations for logs to capture events from only VCF Management components.
- F. Configure VCF Operations for logs to capture events from all VCF infrastructure components.
Answer: A,B,D
Explanation:
The VMware Cloud Foundation 9.0.1 Architecture Overview and Operations Integration Guide state that VCF Operations, combined with VCF Operations for Logs, provides a unified monitoring and observability solution across the entire VCF fleet. The documentation specifies:
"Integrating VCF Operations with VCF Operations for Logs and VCF Automation provides a single-pane-of- glass for monitoring metrics, events, and flows across all management and workload domains." Furthermore, the High Availability deployment model for VCF Operations for Logs is required to meet the
99.9% SLA for continuous availability of monitoring data.
"VCF Operations for Logs can be deployed in High Availability mode to ensure log continuity and fault tolerance." Thus, the architect must:
* Integrate VCF Operations with both Logs and Automation (B, D) for unified visibility.
* Deploy Logs in High Availability (F) mode to achieve the 99.9% availability SLA.
References (VMware Cloud Foundation documents):
* VMware Cloud Foundation 9.0.1 Operations Design Guide - "Integrated Operations and Log Monitoring Architecture."
* VMware Cloud Foundation 9.0.4 Integration Guide - "VCF Operations and Logs HA Deployment."
NEW QUESTION # 61
What is the impact of incorrect VMware network adapter configuration on Broadcom NICs?
- A. Enhanced security risks
- B. Increased network latency
- C. Reduced network throughput
- D. Network packet loss
Answer: B,C,D
Explanation:
Incorrect network configurations on Broadcom NICs lead to latency, reduced throughput, and packet loss.
NEW QUESTION # 62
Which VMware Cloud Foundation tools support automated scaling of cloud resources?
- A. VMware vRealize Automation
- B. VMware vSphere DRS
- C. VMware vSAN
- D. VMware NSX
Answer: A,B
Explanation:
VMware vRealize Automation and vSphere DRS help automate scaling in VMware Cloud Foundation.
NEW QUESTION # 63
Which of the following are key features of vSphere's clustered architecture? (Select all that apply.)
- A. High availability
- B. Workload balancing
- C. Distributed networking
- D. Resource pooling
Answer: A,B,D
Explanation:
Clusters support pooling, HA, and workload balancing.
NEW QUESTION # 64
Which Broadcom components are essential for administering VMware environments with a focus on storage reliability?
- A. Broadcom RAID Controller
- B. vSAN
- C. Broadcom NVMe SSD
- D. Broadcom 25GbE Ethernet Adapter
Answer: A,B
Explanation:
Broadcom RAID Controllers and vSAN are essential for storage reliability in VMware environments.
NEW QUESTION # 65
Which VMware Cloud Foundation features are critical for ensuring disaster recovery and business continuity?
- A. VMware NSX
- B. VMware vSphere HA
- C. VMware vSAN
- D. VMware vRealize Automation
Answer: A,B,C
Explanation:
VMware vSphere HA, vSAN, and NSX are critical for disaster recovery and business continuity in VMware Cloud Foundation.
NEW QUESTION # 66
......
Pass Your VMware Exam with 2V0-13.25 Exam Dumps: https://guidetorrent.passcollection.com/2V0-13.25-valid-vce-dumps.html
